LS-DYNA > Movies > 2022-05-23 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188
95. fert/movie_054left.mp4

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation showing 3D visualization of deformation and fragmentation under loads/impacts. Color mapping highlights stress levels; study focuses on dynamic behavior and material failure patterns during high-speed events.

The screenshot shows a 3D visualization of a LS-DYNA simulation, which is a software package used for simulating complex physical phenomena such as explosions, crashes, and other high-speed events. The simulation appears to be showing the deformation and fragmentation of an object under various loads or impacts.

Here are some key features that can be observed in the screenshot:

  • Color mapping: The color mapping on the surface of the object indicates the magnitude of deformation or stress at different points. Red colors indicate higher levels of deformation or stress, while blue colors indicate lower levels.
  • Deformation patterns: The deformation patterns on the surface of the object suggest that it is undergoing significant plastic deformation, with some areas experiencing large strains and others remaining relatively intact.
  • Fragmentation: The simulation appears to be showing the fragmentation of the object into smaller pieces as a result of the applied loads or impacts. This could be due to material failure, crack propagation, or other mechanisms.
  • Boundary conditions: The boundary conditions of the simulation are not explicitly shown in the screenshot, but they would typically involve specifying the initial and boundary conditions of the problem, such as the geometry, material properties, and loading conditions.

Overall, the LS-DYNA simulation "fert/movie_054left.mp4" appears to be investigating the dynamic behavior of an object under various loads or impacts, with a focus on understanding the deformation and fragmentation patterns that occur.