Download movie as MP4 or WebM.

The screenshot shows a giraffe rendered with different colors on its body, indicating varying levels of deformation or stress. The image is labeled "Mode 10 Freq = 0.01338", suggesting that the simulation is analyzing the structural behavior of the giraffe's skeleton under specific loading conditions.

To create such a simulation, one would need to use LS-DYNA software, which is a commercial finite element method (FEM) solver developed by LSTC. The process involves:

1. Geometry creation: Create a 3D model of the giraffe using computer-aided design (CAD) software or import an existing model.
2. Mesh generation: Divide the 3D model into smaller elements, such as tetrahedral or hexahedral cells, to discretize the geometry for numerical analysis.
3. Material definition: Assign materials to each element, defining their properties, such as density, Young's modulus, and Poisson's ratio.
4. Boundary conditions: Apply boundary conditions to the model, including constraints on displacement, velocity, or force at specific points or surfaces.
5. Loading conditions: Define the loading conditions, such as applying forces, moments, or pressures to specific locations or surfaces of the model.
6. Solver setup: Configure the LS-DYNA solver settings, including the time step size, integration method, and solution tolerance.
7. Simulation run: Run the simulation using LS-DYNA, which will solve the equations of motion for the discretized geometry under the specified loading conditions.
8. Post-processing: Analyze the results, including visualizing deformation modes, stress distributions, and other relevant output variables.

By following these steps, one can create a LS-DYNA simulation that captures the complex structural behavior of a giraffe skeleton under various loading conditions, as depicted in the screenshot.