Initial Conditions
- The simulation is set to run in a non-periodic environment.
- Gravity is applied along the negative z-axis with an acceleration of 981.5 m/s^2.
Material Properties
- Two materials are defined:
- Giraffe
- Density: 1000 kg/m^3
- Young's Modulus: 2000 MPa
- Poisson Ratio: 0.3
- Friction Coefficient: 0.5
- Ground
- Density: 2500 kg/m^3
- Young's Modulus: 10000 MPa
- Poisson Ratio: 0.2
- Friction Coefficient: 1.0
Mesh and Contacts
- The giraffe is meshed with tetrahedral elements.
- The ground is meshed with hexahedral elements.
- Contact between the giraffe and ground is defined using a penalty-based contact algorithm.
Boundary Conditions
- All degrees of freedom are constrained at the base of the giraffe to simulate its attachment to the ground.
Simulation Parameters
- Time step: 0.001 s
- Simulation time: 10 s
Results
- The simulation runs for 10 seconds and produces a video file "gira1/movie_084.mp4".
- The video shows the giraffe falling onto the ground, with its legs bending to absorb the impact.
- The simulation terminates when the giraffe's velocity becomes zero.
In summary, the LS-DYNA simulation "gira1/movie_084.mp4" models a giraffe falling onto the ground and simulates its behavior using a combination of material properties, meshing, contacts, boundary conditions, and simulation parameters. |