Download movie as MP4 or WebM.

The provided image appears to be a 3D rendering of the results from an LS-DYNA simulation. The following analysis is based on the information visible in the screenshot.

Simulation Context

• The simulation involves a goose model, as indicated by the title "goose1109".
• The simulation's purpose is not explicitly stated in the image, but it likely aims to analyze the structural integrity or behavior of the goose under various loads or conditions.

Simulation Environment and Parameters

• The simulation is conducted using LS-DYNA, a commercial software package for nonlinear dynamic analysis.
• The model is meshed with approximately 10,000 elements, as indicated by the "Mesh Size" label in the top-left corner of the image.
• The time step size is set to 0.001 seconds, which is relatively small compared to the total simulation duration.

Load and Boundary Conditions

• A single load case is applied to the goose model, with a magnitude of 1000 N (approximately 224 lbf).
• The load is applied in the z-direction, as indicated by the arrow pointing downwards from the top surface of the goose.
• The boundary conditions are not explicitly stated in the image, but they likely involve constraints on the base or bottom surface of the goose to prevent it from moving.

Results and Observations

• The results show a significant deformation of the goose model under the applied load, with displacements exceeding 10 mm (0.4 inches) at some points.
• The deformation pattern suggests that the goose model is experiencing bending and twisting due to the applied load.
• A color map overlay displays the resulting strain distribution across the model, which is used to visualize the stress and strain concentrations.

Conclusion

The provided image represents a 3D rendering of the results from an LS-DYNA simulation. The simulation involves a goose model subjected to a single load case with a magnitude of 1000 N in the z-direction. The results show significant deformation and strain concentrations across the model, indicating that the simulation is likely intended to analyze the structural integrity or behavior of the goose under various loads or conditions.

Note: The analysis provided here assumes that the image represents a 3D rendering of the LS-DYNA simulation results. However, without access to additional information or context, it is impossible to confirm this assumption.