| 230. dinosolid/movie_098.mp4 |
|---|
AI-generated description: |
Analyzing Mode 98 of a dinosaur model using LS-DYNA simulation. Low-frequency vibration (0.00056516 Hz) dominated by rigid body rotation about the neck. Red areas show high amplitude in head/neck, suggesting low stiffness or poor constraints. |
Step 1. Identify the mode and frequency of vibration This is a Mode 98, and its frequency is 0,00056516. Step 2. Understand what the color map represents The colors represent the amplitude of motion of each part of the dinosaur model during this mode of vibration. The red areas vibrate most strongly, while the blue areas are relatively still. Step 3. Analyze the results: The Mode 98 has a very low frequency and is dominated by rigid body rotation about the neck (Mode 97 was an almost identical mode but with slightly less rotation around the tail). The model's large mass is concentrated in the head, so it tends to rotate slowly when moved from its equilibrium position. This can be seen by observing how the red areas are mostly distributed on the dinosaur's neck and head. This result suggests that these parts of the model have a very low stiffness or are not well-constrained during this mode of vibration. Conclusion: The LS-DYNA simulation "dinosolid/movie_098.mp4" is analyzing the rigid body rotation of a dinosaur model about its neck, with a frequency of 0.00056516, and has identified a Mode 98 where the model's large mass in the head causes it to rotate slowly when moved from its equilibrium position. |