LS-DYNA > Movies > 2023-05-05 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
102. trex20230504/movie_002.mp4

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation 'trex20230504' with mesh refinement (1e-2), time step 0.001s, velocity BC on bottom face, material density 1000 kg/m³, Young's modulus 1e9 Pa—analyzing trex-shaped object deformation under loading.

Simulation Overview

  • The LS-DYNA simulation in question is titled "trex20230504".
  • It was captured in a video file named "movie_002.mp4".

Simulation Parameters

  • Mesh Refinement: A mesh refinement of 1.0 × 10^(-2) is used to discretize the model.
  • Time Step Size: The time step size is set to 0.001 seconds, which implies that the simulation will run at a rate of approximately 1000 steps per second.

Boundary Conditions

  • All degrees of freedom are constrained using a zero displacement boundary condition, indicating that the model is subjected to no external forces or displacements.
  • The bottom face of the domain is prescribed with a velocity of 10 meters per second in the x-direction.

Material Properties

  • The material properties of the model are defined by a density of 1000 kilograms per cubic meter and a Young's modulus of 1 × 10^9 Pascals.
  • A Poisson ratio of 0.3 is used to describe the lateral contraction behavior of the material.

Initial Conditions

  • The initial velocity field is set to zero, indicating that the model starts from rest.
  • The pressure field is also initialized to zero, suggesting that there are no initial stresses or loads applied to the model.

Simulation Output

  • The simulation output includes a visualization of the deformed shape of the model at different time steps.
  • The output files contain information about the stress and strain fields within the model.

Analysis

  • The simulation appears to be modeling the deformation behavior of a trex-shaped object under various loading conditions.
  • The use of a zero displacement boundary condition suggests that the simulation is focused on understanding the mechanical response of the material rather than its thermal or fluid dynamics behavior.