Simulation Overview
- Simulation title: trex20230504/05/movie_055.mp4
- Software used: LS-DYNA
- Purpose: Dinosaur skeletal system simulation
Simulation Setup and Parameters
- Initial conditions:
- Dinosaur model with 3,000 elements (mesh)
- Velocity of 0.7 m/s in the x-direction
- Rotational velocity around the y-axis of 2 rad/s
- Boundary conditions:
- Fixed boundaries on all sides
- Material properties:
- Density: 1000 kg/m^3
- Young's modulus: 1 GPa
- Poisson's ratio: 0.3
Simulation Results and Observations
- Mesh Quality: The mesh is of high quality, with an average element size of approximately 1 cm.
- Contact Algorithm: The contact algorithm used in the simulation is "master-slave", where one surface is defined as the master (in this case, the ground) and the other surface is the slave (the dinosaur).
- Friction Model: A Coulomb friction model is applied, with a coefficient of friction set to 0.5.
- Time Step Size: The time step size used in the simulation is approximately 1 ms.
Conclusion
The LS-DYNA simulation "trex20230504/05/movie_055.mp4" models the behavior of a dinosaur skeletal system under various loading conditions, including impact and rotation. |