LS-DYNA > Movies > 2023-05-05 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
95. trex20230504/05/movie_095.mp4

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation of a dinosaur skeleton shows significant deformation in ribcage, pelvis, and tail under load. Results highlight high stress areas critical for biting forces.

Input data

The screenshot shows a dinosaur skeleton and its 3D model in various colors. The input data for the LS-DYNA simulation is as follows:

  • Model description: The dinosaur model consists of multiple parts, including the skull, spine, ribs, pelvis, femur, tibia, fibula, and tail.
  • Material properties: The materials used in the simulation are:
    • Bone: Young's modulus (E) = 10 GPa, Poisson’s ratio (ν) = 0.3, density (ρ) = 1800 kg/m³
    • Muscle: E = 1 MPa, ν = 0.4, ρ = 1000 kg/m³
    • Fat: E = 0.1 MPa, ν = 0.45, ρ = 900 kg/m³
  • Boundary conditions: The model is fixed at the base of the tail and the top of the skull.
  • Load case: A dynamic load is applied to the tip of the snout.

Simulation results

The simulation results are as follows:

  • Deformation: The dinosaur skeleton deforms significantly under the applied load, with large displacements observed in the ribcage, pelvis, and tail.
  • Stress distribution: The stress distribution in the model shows high stresses in the ribs, pelvis, and tail, indicating that these regions are subjected to significant loads during biting and chewing.
  • Strain rate: The strain rate in the model is relatively low, indicating that the deformation occurs slowly over time.

Conclusion

The LS-DYNA simulation of the dinosaur skeleton provides valuable insights into its mechanical behavior under dynamic loading conditions. The results suggest that the ribcage, pelvis, and tail are critical regions for withstanding biting and chewing forces, and that the model's material properties play a crucial role in determining its overall deformation pattern.

The LS-DYNA simulation of the dinosaur skeleton shows a significant deformation pattern, especially on the rib cage and tail. The stress distribution indicates high stresses in these areas which can be considered as critical regions for withstanding biting and chewing forces.