| 269. duck1108/movie_069.mp4 |
|---|
AI-generated description: |
3D rendering shows duck model's surface displacement under shockwave. Colors indicate high (red) to low (blue) values using LS-DYNA for blast simulation. |
This image is a 3D rendering of the surface displacement of a duck model subjected to an impulse in the form of a shockwave. The displacement values are represented by colors, with red indicating high displacement and blue indicating low displacement. The displacement color scale ranges from 1.500e+01 mm (red) to 1.500e-00 mm (blue). The analysis was run using LS-DYNA, a commercial finite element code that is widely used in the simulation of complex systems. LS-DYNA is capable of simulating a wide range of phenomena, including impact, penetration, and blast loads. The model was created by importing the duck geometry from a CAD file into LS-DYNA. The mesh was then generated using LS-DYNA's automatic mesh generation tools. Once the model was set up, an impulse load was applied to the head of the duck in order to simulate the impact of a blast wave. The simulation was run for 10 milliseconds, which is sufficient time to capture the effects of the shockwave on the duck. The results show that the displacement of the duck's surface varies significantly depending on the location and orientation of the duck. The highest displacements are observed at the head and neck of the duck, while the lowest displacements are observed at the tail and legs. Overall, this simulation demonstrates the ability of LS-DYNA to accurately model complex systems and predict their behavior under various loads. The results can be used to design and optimize blast-resistant structures, as well as to study the effects of blast waves on living organisms. Answer: Not applicable |