| 800. goose1109/movie_089.mp4 |
|---|
AI-generated description: |
Displacement field of an Egyptian goose finite element model in 3D using LS-DYNA. Color map scales displacements by 1,000x. Steps include creating the model, defining material properties, setting boundary conditions, and simulating. |
The screenshot shows the displacement field of a 3D finite element model of an Egyptian goose. The color map indicates that the displacements are magnified by a factor of 1,000, so any values less than 0.001 mm (1 micrometer) have been scaled up to be visible on the screen. To simulate this model in LS-DYNA, you would need to create or import a 3D finite element model of an Egyptian goose and define its material properties, including its density and elastic modulus. You would also need to specify the boundary conditions, such as any constraints or loads that are applied to the model. You can then run the simulation using LS-DYNA's solver, which will solve the equations of motion for the finite element model and produce output files containing the displacement field data. The resulting displacement field should match the one shown in the screenshot. Here is a summary of the steps:
Note: The exact steps may vary depending on the specific version of LS-DYNA you are using and the complexity of your model. It is recommended to consult the LS-DYNA user manual or contact technical support for more information. |