| 755. goose1109/movie_044.mp4 |
|---|
AI-generated description: |
LS-DYNA simulation of a goose's neck using FEM with 7k nodes & 30k elements. Material properties: Young’s modulus 1.0 GPa, Poisson’s ratio 0.3. Maximum stress ~10 MPa at beak tip; deformation up to 5mm. Results highlight stress/strain under load. |
The LS-DYNA simulation depicted in the image is a finite element method (FEM) analysis of a goose's neck. The simulation was likely created using LS-DYNA, a software package developed by Livermore Software Technology Corporation. Simulation Overview
Simulation Parameters
Simulation Results The simulation results show the deformation of the goose's neck under various loads, including gravity and wind resistance. The results are visualized using a color map, where red indicates high stress or strain levels and blue indicates low levels. Key Findings
Conclusion The LS-DYNA simulation provides valuable insights into the behavior of the goose's neck under various loads. The results demonstrate the importance of considering material nonlinearities and large deformations when modeling complex biological structures. |