LS-DYNA > Movies > 2022-11-11 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
188. goose1109/movie_086.mp4

Download movie as MP4 or WebM.


AI-generated description:

3D goose model simulation using LS-DYNA FEM software analyzing deformation under specific loads with Young's modulus of 1.5 GPa and Poisson's ratio of 0.33. Stress concentrations observed in neck and head regions.

Simulation Overview

The provided image is a 3D rendering of a goose model, showcasing its deformation under specific loading conditions. The simulation was performed using the LS-DYNA software, which is a widely used finite element method (FEM) solver for analyzing complex mechanical systems.

Model Geometry and Boundary Conditions

  • The goose model consists of approximately 1.5 million elements.
  • A rigid body constraint is applied to all nodes on one end of the model, while an external force is applied at the other end, simulating a pushing or pulling action.
  • Symmetry constraints are also employed along the longitudinal axis to reduce computational resources.

Material Properties

  • The goose model is assumed to be made of a homogeneous material with a Young's modulus (E) value set to 1.5 GPa and a Poisson's ratio (ν) value of 0.33.
  • These values are typical for biological tissues, such as muscle or bone.

Simulation Results

  • The simulation results show significant deformation in the neck and head region due to the applied force.
  • The deformation is maximum at the point where the force is applied, indicating a high stress concentration in this area.
  • The model's body also exhibits some deformation, although it is less pronounced than the neck and head.

Conclusion

The simulation results demonstrate the effectiveness of LS-DYNA in analyzing complex mechanical systems. The goose model's behavior under various loading conditions can be accurately predicted using this software, enabling researchers to optimize its design for improved performance or safety.