LS-DYNA > Movies > 2022-11-11 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
196. goose1109/movie_094.mp4

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation of a goose (movie 094.mp4) uses a rainbow gradient to show displacement from high (red) at the beak tip to low (blue) at the tail.

The provided image shows a 3D rendering of a blue goose with a rainbow color gradient indicating displacement. The rainbow colors are arranged in the order of red, orange, yellow, green, cyan, and blue, which corresponds to higher displacements at the tip of the beak and lower displacements towards the tail.

Simulation Details

  • File Name: movie_094.mp4
  • File Type: LS-DYNA simulation file

LS-DYNA Simulation Steps

  1. Importing Geometry: Load the 3D model of a goose.
  2. Defining Material Properties: Assign material properties to each part of the goose, such as its feathers and beak.
  3. Applying Loads: Apply loads to the goose, such as wind or water currents.
  4. Solving Dynamics: Run the simulation using LS-DYNA's dynamic solver.
  5. Visualizing Results: Visualize the displacement results in a 3D rendering.

Conclusion

The screenshot shows a 3D visualization of the displacement results from an LS-DYNA simulation of a goose under various loads. The rainbow color gradient indicates that the tip of the beak experiences the highest displacements, while the tail experiences lower displacements.