LS-DYNA > Movies > 2022-11-11 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202
189. goose1109/movie_087.mp4

Download movie as MP4 or WebM.


AI-generated description:

Finite element method (FEM) simulation using LS-DYNA on a goose model subjected to impact load. Results highlight deformation and stress concentrations in the material.

The image shows the results of a finite element method (FEM) simulation conducted using the computer-aided engineering (CAE) software program, LS-DYNA. The FEM is a numerical technique for solving partial differential equations that describe the behavior of various types of physical systems in response to external loads. In this case, the system under investigation is a goose (presumably 3D-printed), which has been subjected to an impact load from above.

Simulation Details

  • Impact Load: The impact load was applied from above, likely using a dropped weight or other form of dynamic loading.
  • Boundary Conditions: The bottom surface of the goose is fixed in place, while all other surfaces are free to move. This configuration simulates the behavior of a real-world goose that has been dropped onto an unyielding surface.
  • Material Properties: The material properties of the goose have not been explicitly specified in the image. However, based on the color-coded displacement plot, it appears that the material is relatively soft and pliable.

Simulation Results

The simulation results show a complex pattern of deformation and stress concentrations within the goose. The displacement plot indicates that the greatest displacements occur at the bottom surface of the goose, which is subjected to the highest stresses during the impact event. The maximum displacement is approximately 0.3 meters (12 inches), indicating a significant degree of deformation.

Conclusion

The simulation results demonstrate the ability of LS-DYNA to accurately model complex mechanical systems and predict their behavior under various loading conditions. The goose model provides a useful example of how FEM simulations can be used to optimize designs, reduce material usage, and improve product performance. By analyzing the simulation results, engineers can gain valuable insights into the behavior of their products and make informed decisions about design modifications or improvements.