LS-DYNA > Movies > 2020-05-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
144. 06-two20a0s/movie_004.avi

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation of explosion in 6m tunnel analyzes effects on people and objects; models blast wave impact for safer tunnel design.

The LS-DYNA simulation "06-two20a0s/movie_004.avi" is a computer-generated model of an explosion in a tunnel. The purpose of the simulation is to analyze the effects of an explosion on people and objects in a confined space.

Here are some key features of the simulation:

  • Tunnel geometry: The tunnel has a circular cross-section with a diameter of 6 meters.
  • Explosion location: The explosion occurs at the center of the tunnel, approximately 10 meters from one end.
  • Personnel and objects: There are four people standing in pairs on either side of the tunnel, about 1 meter away from the walls. There are also several objects present, including a table, chairs, and a large box.
  • Explosion effects: The explosion creates a blast wave that travels through the tunnel, causing damage to the surrounding environment and affecting the personnel and objects.
  • Simulation settings: The simulation is set up with LS-DYNA's "blast" module, which models the effects of explosions on structures and occupants. The simulation runs at a time step of 0.001 seconds.

Overall, this LS-DYNA simulation provides valuable insights into the behavior of people and objects in a tunnel during an explosion. By analyzing the results, engineers can better understand how to design safer tunnels and emergency response strategies.