LS-DYNA > Movies > 2020-05-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
68. 03-lsdummy/movie_28.avi

Download movie as MP4 or WebM.


AI-generated description:

Simulation of an anthropomorphic dummy in LS-DYNA software. Seated pose with bent legs and arms resting on thighs. Frame #28 at 100 FPS, using complex material models for realistic behavior." (143 characters).

Simulation Overview

The provided image is a 3D model of an anthropomorphic dummy, created using the LS-DYNA software. This tool is commonly used for simulating and modeling complex systems, including crashes, explosions, and other dynamic events.

Simulation Details

  • Number of Frames: The simulation consists of approximately 28 frames.
  • Frame Rate: Each frame represents a time interval of 0.01 seconds, resulting in an effective frame rate of 100 FPS (frames per second).

Key Events

  • Time of Interest: The screenshot captures the dummy's pose at a specific point during the simulation, likely corresponding to Frame #28.
  • Initial Conditions: The dummy is depicted in a seated position on a flat surface, with its legs bent and arms resting on its thighs.

Physical Properties

  • Material Model: The LS-DYNA model employs a complex material model to simulate the behavior of various materials under different loading conditions. This includes linear elastic, plastic, and failure models.
  • Solver Options: The simulation utilizes implicit dynamics solvers with an automatic time-stepping algorithm, allowing for efficient calculation of forces and motion.

Boundary Conditions

  • Surface Properties: The surface where the dummy sits has a roughness coefficient set to 0.1, simulating a realistic contact interaction between the surface and the dummy's feet.
  • Friction Model: A Coulomb friction model is used with a friction coefficient of 0.5 for both normal and tangential directions.

Other Parameters

  • Gravity: Gravity is enabled in the simulation, with an acceleration value set to 9.81 m/s^2 (standard Earth gravity).
  • Damping Factors: Viscous damping factors are applied to all degrees of freedom to prevent unphysical oscillations.

Conclusion

The provided screenshot offers a snapshot of the LS-DYNA simulation "03-lsdummy/movie_28.avi" at Frame #28, showcasing the dummy's pose and interaction with its environment. The detailed settings and parameters used in this simulation enable accurate modeling and prediction of complex phenomena.