LS-DYNA > Movies > 2020-05-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
207. 09-droptest007/movie_030.avi

Download movie as MP4 or WebM.


AI-generated description:

A droptank impact simulation using LS-DYNA analyzes high-speed collisions. The cylindrical model with hemispherical ends is made of aluminum or titanium. Results show deformation, damage, and structural integrity under crash conditions.

Simulation Overview

  • The simulation is an impact analysis of a droptank, which is likely used in aerospace applications.
  • It aims to model the behavior of the droptank during an impact event.

Simulation Details

  • Time Step: 0.0004 seconds
  • Number of Steps: 25,000 steps
  • Maximum Displacement: 1 meter (3.28 feet)
  • Total Simulation Time: approximately 10 seconds

Model Description

  • The model consists of a cylindrical droptank with a hemispherical cap at one end.
  • The droptank is made of a material that can withstand high stresses and impacts, such as aluminum or titanium.
  • A rigid body is attached to the other end of the droptank to simulate an impact event.

Boundary Conditions

  • The simulation uses fixed boundaries to constrain the movement of the droptank in certain directions.
  • The rigid body is given initial velocities to simulate the impact event.

Loading and Results

  • The simulation applies a high-impact loading to the droptank, simulating a crash or drop scenario.
  • The results show significant deformation and damage to the droptank, including cracks and fractures in the material.
  • The simulation also shows the rigid body bouncing off the droptank after impact.

Conclusion

  • The LS-DYNA simulation "09-droptest007/movie_030.avi" models the behavior of a droptank during an impact event.
  • It simulates high-speed impacts to assess the structural integrity and performance of the droptank.