LS-DYNA > Movies > 2020-05-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217
164. 06-two20a0s/movie_024.avi

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation shows a 35mph frontal crash of a Ford Crown Victoria sedan with three dummies; no airbag deployment as vehicle deforms, risking occupant injuries.

The image shows a 3D simulation of a car crash test using the LS-DYNA software. The simulation is visualized as a movie, with various frames or screenshots that can be analyzed to understand the dynamics of the crash.

Frame 24 Analysis

In Frame 24 (movie_024.avi), the simulation shows the following:

  • Vehicle: A full-size sedan ( likely a Ford Crown Victoria) is shown in a frontal impact at approximately 35 mph (56 km/h).
  • Impact Location: The vehicle's front end has made contact with an obstacle, causing damage to the hood and crumpling of the bumper.
  • Deformation: The vehicle's body has started to deform, with visible crush zones forming around the impact area.
  • Airbags: None of the airbags have deployed yet.
  • Occupants: Three dummies are seated in the front seats:
    • Driver: In the driver's seat, wearing a seatbelt. The dummy is unrestrained and its head has contacted the windshield frame.
    • Passenger: In the passenger seat, also wearing a seatbelt. The dummy is unrestrained and its head has contacted the roof lining.
    • Rear-seat occupant: A third dummy is seated in the rear seat, but it appears to be a smaller size or a child restraint system (CRS) dummy.

Key Observations

  • The vehicle's structure is designed to absorb the impact energy by crumpling and deforming.
  • The airbags have not deployed yet, which suggests that the crash severity has not reached the threshold for deployment.
  • The unrestrained dummies in the front seats are at risk of serious injury or fatality due to head contact with the windshield frame and roof lining.
  • The rear-seat occupant is likely designed to demonstrate the effectiveness of a CRS in protecting children during a crash.

Conclusion

The LS-DYNA simulation provides valuable insights into the behavior of vehicles and occupants during a frontal impact. By analyzing Frame 24, we can see how the vehicle's structure responds to the impact, and how the occupants are affected by the crash. This information can be used to improve vehicle safety designs and reduce the risk of injury or fatality in real-world crashes.