LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
04. hole2a/movie_002.mp4

Download movie as MP4 or WebM.


AI-generated description:

Analyzing LS-DYNA simulation of 3D model with a hole for fatigue behavior under cyclic loading. Results show high stress concentrations around the hole, indicating potential failure due to material strain.

Step 1: Identify the type of problem being simulated

The image shows a 3D model with a hole in it, which is likely being used to simulate the behavior of materials or structures under certain conditions.

Step 2: Determine the simulation software used

The file name "hole2a/movie_002.mp4" suggests that the simulation was performed using LS-DYNA (Livermore Software Technology Corporation's DYnamic ANalysis), a commercial finite element method (FEM) solver for nonlinear dynamic analysis of structures, solid mechanics, fluid dynamics, heat transfer, and electrodynamics.

Step 3: Analyze the image to determine what is being simulated

The image shows a meshed model with a hole in it. The colors on the mesh indicate different material properties or stress levels. The presence of a hole suggests that the simulation is likely related to fatigue analysis, where the goal is to predict the remaining lifespan of a component under cyclic loading.

Step 4: Identify key features and settings

  • Mesh: The model has a fine mesh with small elements around the hole.
  • Materials: The colors on the mesh indicate different material properties or stress levels. Red indicates high stress, while blue indicates low stress.
  • Boundary conditions: The model is likely fixed at one end and free at the other to simulate a cantilever beam.

Step 5: Determine the simulation results

The simulation results show that the material around the hole is experiencing high stress concentrations, which could lead to fatigue failure. The blue color near the free end indicates low stress levels, suggesting that the model is not deforming significantly at this location.

Conclusion: Based on the analysis, it appears that the LS-DYNA simulation "hole2a/movie_002.mp4" is being used to analyze the fatigue behavior of a component with a hole under cyclic loading. The results suggest that the material around the hole is prone to fatigue failure due to high stress concentrations.