LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
101. hole2a/movie_051a.mp4

Download movie as MP4 or WebM.


AI-generated description:

Screenshot of LS-DYNA simulation showing deformation and stress around a circular hole in a plate. Color-coded scale highlights strain concentrations at edges, indicating potential failure areas.

The provided image appears to be a screenshot of an LS-DYNA simulation, specifically focusing on the deformation and stress distribution around a circular hole in a plate. The visualization is achieved through a color-coded scale, where different colors represent various levels of strain or stress.

Key Features

  • Circular Hole: A circular hole is centered within the plate, with the surrounding material deformed and strained due to the presence of the hole.
  • Color-Coded Scale: Different colors are used to indicate varying degrees of deformation or stress. The color scheme likely ranges from red (indicating high strain or stress) through green (representing moderate levels) to blue (signifying low strain or stress).
  • Deformation Pattern: The deformation pattern around the hole suggests that the material is being stretched and compressed, with maximum strain occurring at the edges of the hole.
  • Stress Concentration: The visualization indicates a significant concentration of stress at the edges of the hole, which could potentially lead to material failure or crack initiation.
  • Material Properties: Although not explicitly stated, the deformation pattern suggests that the material is likely elastic-plastic, allowing for some degree of plastic deformation before failing.

Conclusion

The LS-DYNA simulation "hole2a/movie_051a.mp4" provides a detailed visualization of the deformation and stress distribution around a circular hole in a plate. The analysis reveals significant strain and stress concentrations at the edges of the hole, highlighting potential areas of material failure or crack initiation.