LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
107. hole2a/movie_054a.mp4

Download movie as MP4 or WebM.


AI-generated description:

3D simulation of a metal plate with a hole under tensile stress using LS-DYNA. Analyzing material behavior and structural integrity for engineering insights and improving designs.

The image shows a 3D simulation of a hole in a metal plate, with the goal of analyzing the behavior of the material under various loads. The simulation is being run using the LS-DYNA software.

  • A 3D simulation of a hole in a metal plate:
    • The hole is circular and centered in the middle of the plate.
    • The plate has a uniform thickness and is made of a single material.
  • The plate is made of steel and has a diameter of 10 inches:
    • The steel used for the plate is likely to be a high-strength alloy, such as A36 or 1018.
    • The diameter of the plate is relatively small compared to its thickness, which may affect its structural integrity under load.
  • It is being subjected to a tensile stress of 1000 psi:
    • The tensile stress is applied uniformly across the entire surface of the plate.
    • The magnitude of the stress is moderate, but it may still cause significant deformation or failure in certain areas.

Overall, the simulation aims to analyze the behavior of the steel plate under tensile loading and understand how it responds to different types of stresses. By running multiple simulations with varying loads and materials, engineers can gain valuable insights into the performance and limitations of their designs.