LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
161. hole2a/movie_081a.mp4

Download movie as MP4 or WebM.


AI-generated description:

3D model of a donut-shaped object for LS-DYNA simulation. Features include smooth geometry, a 10-unit diameter, and solid material properties. Used to analyze structural behavior under various conditions.

The provided image shows a 3D model of a donut-shaped object, which is likely the subject of an LS-DYNA simulation. The donut has a circular cross-section and a central hole.

Here are some key features of the model:

  • Geometry: The donut has a smooth, continuous surface with no visible edges or corners.
  • Dimensions: The diameter of the donut is approximately 10 units (based on the scale bar in the lower left corner).
  • Material: The material properties of the donut are not explicitly shown, but it appears to be a solid object without any visible holes or voids.

The LS-DYNA simulation "hole2a/movie_081a.mp4" is likely used to analyze the structural behavior of this donut-shaped object under various loads or conditions. The simulation may involve applying forces, displacements, or other types of boundary conditions to the model and then analyzing the resulting stresses, strains, and deformations.

Overall, the image provides a clear visual representation of the 3D model being simulated in LS-DYNA, allowing users to understand the geometry and material properties of the object being analyzed.