LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
126. hole2a/movie_063.mp4

Download movie as MP4 or WebM.


AI-generated description:

LS-DYNA simulation of Mode 63 (214.55 Hz) showing a detailed 3D model with color-coded materials (red=high stiffness/density, green=moderate, blue=low). Results depict deformation and stress vectors, part of movie 063.mp4 animation.

Here is a detailed description of the LS-DYNA simulation from the provided screenshot:

Title and Parameters

  • The title at the top left corner reads "Mode 63".
  • The frequency parameter is set to 214.55.

3D Model Visualization

The screenshot shows a complex 3D model, likely representing an automotive part or component. The model appears to be made up of various surfaces and curves, with different colors indicating different materials or properties.

Mesh and Element Type

  • The model's surface is represented by a mesh composed of small triangles.
  • The element type is not explicitly labeled but appears to be a combination of hexahedral (3D) elements and shell elements.

Material Properties

  • Material properties are color-coded, with red indicating high stiffness or density, green representing moderate values, and blue signifying low stiffness or density.
  • A few regions within the model have been highlighted in yellow, possibly indicating areas of high stress or strain.

Simulation Results

  • The simulation results are displayed as a deformed shape, showcasing how the material would behave under various loads or conditions.
  • Displacement vectors are visible, indicating the direction and magnitude of deformation at different points on the surface.

Boundary Conditions and Loads

  • Boundary conditions are not explicitly shown in this screenshot but may include constraints such as fixed supports, frictionless surfaces, or applied forces.
  • The simulation likely involves dynamic analysis, with time-dependent loads or boundary conditions influencing the behavior of the model over time.

Other Annotations

  • A small icon in the top-left corner suggests additional data is available for this simulation run.
  • The "movie_063.mp4" filename implies that this screenshot is part of a larger animation or sequence of results from an LS-DYNA simulation.