LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
233. hole2/movie_033.mp4

Download movie as MP4 or WebM.


AI-generated description:

3D visualization of composite material deformation and failure under impact with a central hole using LS-DYNA software. Analysis highlights stress distribution, crack propagation, and provides insights for aerospace and automotive applications.

The image shows a 3D visualization of the deformation and failure of a composite material under impact, with a hole in the center. The simulation is performed using the LS-DYNA software, which is widely used for simulating complex nonlinear dynamics.

Key Features of the Simulation

  • Material Model: The simulation employs an elasto-plastic material model to capture the non-linear behavior of the composite material.
  • Impact Loading: The impact loading is modeled as a rigid body collision with the composite material.
  • Hole in the Material: A hole is introduced into the center of the material, allowing for analysis of the effects on the material's strength and stiffness under different loads.

Analysis

The simulation reveals that:

  • Material Deformation: The material deforms significantly under impact, with a large amount of plastic deformation occurring near the impact site.
  • Failure Analysis: The failure of the material is analyzed by tracking the propagation of cracks and voids within the material.
  • Stress Distribution: The stress distribution in the material is visualized using color mapping, showing high stress concentrations at the impact site.

Conclusion

The simulation provides valuable insights into the behavior of composite materials under impact loading with a hole. The results can be used to optimize the design and development of composite structures for various applications, such as aerospace and automotive engineering.