LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
135. hole2a/movie_068a.mp4

Download movie as MP4 or WebM.


AI-generated description:

3D model of a disk with a hole used to study material behavior under axial loads using LS-Dyna. The simulation tests strength, durability, and stress concentration via finite element analysis.

The image depicts a 3D model of a disk with a hole in it, which is used to study the behavior of materials under various loads. The hole is likely designed to test the strength and durability of the material surrounding it.

Analysis Steps:

  • Step 1: Identify the type of analysis being performed on the model.
    • The simulation is using LS-DYNA, a commercial software package for nonlinear dynamic analysis of structures, fluids, contacts, fibers, plates, and shells.
  • Step 2: Determine the loading conditions applied to the model.
    • The hole in the center suggests that the material is being tested under stress or pressure.
  • Step 3: Identify any relevant features or details on the model.
    • The grid pattern on the surface of the disk indicates that it may be a finite element mesh, used for numerical analysis.
  • Step 4: Consider the purpose of the simulation.
    • The fact that the hole is centered in the disk suggests that the material's behavior under axial loads is being tested.

Conclusion:

The LS-DYNA simulation "hole2a/movie_068a.mp4" appears to be testing the strength and durability of a material under axial loads, with the hole serving as a point of stress concentration. The grid pattern on the surface indicates that the model is being analyzed using finite elements.