LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
176. hole2a/movie_088.mp4

Download movie as MP4 or WebM.


AI-generated description:

Visualizes LS-DYNA simulation of structural deformation near a hole at Mode 88 (250.74 Hz). Color map shows displacement, mesh lines indicate deformation field and stress concentrations.

The provided image appears to be a screenshot from an LS-DYNA simulation, specifically highlighting the deformation of a structure with a hole. The visual representation is based on the Mode 88 frequency at 250.74 Hz.

Simulation Overview

  • The simulation likely involves analyzing the structural integrity and dynamic behavior of the material under various loading conditions.
  • The hole in the structure may be intended to represent a defect or a feature that affects its mechanical properties.

Key Features

  • Color Map: The color map on the left side of the image indicates that the deformation is represented using a red-to-blue gradient, where red signifies maximum displacement and blue represents minimum displacement.
  • Deformation Field: The mesh lines in the center of the image show the deformation field around the hole, with the lines indicating the direction and magnitude of the displacements.
  • Frequency Label: In the top-left corner, "Mode 88" is labeled at a frequency of 250.74 Hz.

Interpretation

This screenshot provides a snapshot of the dynamic behavior of the structure under specific loading conditions, allowing for visualization of how it responds to external forces and its potential failure modes. The simulation likely evaluates the structural integrity by analyzing stress concentrations around the hole and overall stability against various types of loads (tensile, compressive, shear).