| 174. hole2a/movie_087.mp4 |
|---|
AI-generated description: |
LS-DYNA simulation shows stress distribution around a 50 mm radius axisymmetric hole, highlighting high compressive stresses (up to ~240 MPa) near edges with red indicating stress concentrations. |
Step 1: Identify the screenshot. The screenshot captures a moment in an LS-DYNA simulation, displaying the stress distribution around a hole. Step 2: Interpret the color legend. The color legend shows red, blue, and yellow colors. Red indicates high compressive stresses, blue indicates tensile stresses, and green or gray indicate less compressive or tensile stresses. Step 3: Identify the hole geometry. The hole has a rounded edge; therefore, it is likely an axisymmetric hole with a radius of about 50 mm (as indicated by the red color). Step 4: Analyze the stress distribution. Stress concentrations occur at both edges of the hole, with high compressive stresses around the circumference. The maximum compressive stress is approximately 240 MPa. Conclusion. The LS-DYNA simulation displays the stress distribution around an axisymmetric hole of about 50 mm in radius, showing high compressive stresses near both edges and a maximum value of approximately 240 MPa. |