LS-DYNA > Movies > 2022-06-21 > 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261
43. hole2a/movie_022a.mp4

Download movie as MP4 or WebM.


AI-generated description:

The image shows a 3D model of a cylindrical shell with a hole created using LS-DYNA for simulating material behavior under different loads and stress conditions.

The image shows a 3D model of a cylindrical shell with a hole in it, which is likely being used to simulate the behavior of the material under various loads or stress conditions. The model appears to be created using LS-DYNA, a commercial software package for nonlinear dynamic analysis of structures, fluids, and contacts.

Based on this screenshot, here are some key points that can be inferred about the simulation:

  • Material properties: The material properties of the cylindrical shell are not explicitly shown in the image. However, it is likely that the user has defined these properties in the LS-DYNA input file.
  • Load conditions: The load conditions applied to the model are also not visible in the image. It is possible that the user has applied a variety of loads, such as pressure, temperature, or vibrations, to simulate real-world scenarios.
  • Boundary conditions: The boundary conditions of the model are not shown in the image. These may include constraints on displacement, rotation, or other degrees of freedom at specific points on the surface of the shell.
  • Meshing: The mesh used for the simulation is a finite element mesh, which is a common approach for simulating complex geometries and behaviors. The mesh appears to be composed of quadrilateral elements, with some elements being smaller than others.

Overall, the image suggests that the user has set up a sophisticated LS-DYNA simulation to analyze the behavior of a cylindrical shell under various loads and boundary conditions. However, without more information about the specific input file used for the simulation, it is difficult to provide further details about the model's properties and behaviors.

To answer your question directly: The image shows a 3D model of a cylindrical shell with a hole in it, which is likely being used to simulate the behavior of the material under various loads or stress conditions.